select circuit
英 [sɪˈlekt ˈsɜːkɪt]
美 [sɪˈlekt ˈsɜːrkɪt]
网络 选择电路
双语例句
- Please select atleast one circuit.
请至少选择一个电路。 - To select feature samples in circuit fault diagnosis, we propose a method of cloud-sample generation, and apply it to artificial-neural-network training and recognition.
为了选择电路故障诊断中的特征样本，提出了产生云样本的方法，并用于神经网络的训练和识别。 - The theory of circuit and how to select circuit parameter are analyzed in detail and the experiment result is given.
详细地分析了其电路工作原理和参数的选择方法，并给出了实验结果。 - The detector design consists of design and select of optic parts of an apparatus, circuit design, sampling area control and antipollution device design.
探测器的设计有：光学器件的设计和选取、电路的设计、采样区大小控制装置和防污染装置的设计。 - Finally, the computer aided method is used to analyze the dynamic performance and select the parameters of the circuit.
最后应用电子计算机辅助方法，分析系统的动态特性及选择线路参数，并从中得到了若干结论。 - Protective devices for short-circuit and earthing fault of water-pump and wind-motor should select non-selective equipment type distribution circuit-breaker which can meet starting requirements of motor.
消防水泵、风机的短路保护和接地保护电器宜选择满足电动机启动要求的非选择性装置式配电型断路器。 - The paper introduces a practical driving circuit of transistor converted power source, analyzes the principle and performance of the circuit, and puts forward the method to select the main parameters of the circuit.
介绍了一种实用的晶体管逆变电源的驱动电路，分析了它的工作原理和特点，提出了主要参数的选择方法。 - How to Select and Use Molded Circuit Breaker Reasonably
如何合理选择和使用塑壳断路器动态电路分析的几个问题 - Several digital circuits are also used in the proposed DAC to implement such as flip-latch circuit, thermometer decoder, current select circuit, etc.
设计了DAC的数字电路部分包括锁存器、温度计译码器、电流源状态逻辑选电路等。 - In the design procedure, I am responsible for the design and simulation of reference voltage element and oscillator; I have also analyzed and simulated the mode select device, error comparator, logic circuit, protect circuit and power transistor conscientiously.
设计中，本人主要担负基准电压源、振荡器的设计和仿真，对模式选择、误差比较器、逻辑电路、保护电路、功率管也做了细致的分析和仿真； - According to the size and characteristic of magnetic field leakage, select appropriate sensors with high sensitivity radio, and select corresponding circuit for data collection, filter the waves and magnify.
根据漏磁场的大小和特点，选择合适的高灵敏度的磁传感器，并确定相应的数据采集、滤波和放大电路。 - And then we have described how to select operating frequency of the conversion circuit and to design the parameters of main devices in order to ensure lower power loss and higher efficiency.
本文从控制主要元器件的功耗入手，讨论如何选择变换器的工作频率和设计主要器件的参数，以确保电源的低功耗和高效率。 - Take out test station structure, select PLC and confirm PLC circuit;
提出并确定了测试站结构，选定单片机，审核单片机电路设计； - This paper describes how to select a more suitable fluidic circuit from among three plans by mean of analyzing and comparing the contradictions from the practical standpoints.
本文介绍了如何应用实践的观点，通过矛盾的分析和比较，在三种方案中选择了较为合适的射流线路。 - The circuits of the testing bed include all the sensors select, the sensors regulator circuit design, the filter circuit design, the digital display watch design, the A/ D card design, the relay module design.
试验台电路部分的设计包括传感器的选择及其调整电路的设计、滤波电路的设计、数字显示表的设计、A/D卡的设计和继电器模块的设计。 - After select the most suitable topology structure of circuit, we simulate the biasing circuit, input and output matching circuit.
在选定合适的拓扑结构后，对放大器的静态偏置点、输入输出匹配电路进行仿真。 - The distribution is composed of EPROM memory, counter, programmable counting circuit and select circuit of the type and operation mode of motor etc.
该分配器主要由EPROM存储器、计数器、可编程计数长度选定电路和电机类型及其工作方式选择电路等组成。 - To improve its efficiency and linearity, it is important for a HBT MMIC power amplifier to select a bias circuit.
设计HBTMMIC功率放大器，偏置电路的选择对于提高功率放大器的效率和线性度至关重要。 - This paper describes the use of programming methods to select the optimal circuit parameters and quantitively analyse the structure of mineral processing circuits.
本文介绍了应用规划方法选择最佳的流程参数，并定量地分析了选矿流程的结构。 - Wavelets Method to Select Single Phase Fault Circuit for Small Current Grounding Power System
小波变换在小电流接地系统单相接地故障选线方面的应用与研究 - In the parameters measurement part, the design is mainly made up of three parts such as sensors select, sensors circuit designs, experiment measurement.
参数测量部分的设计包括传感器的选型，变送电路的设计和采集结果的测量。 - How to Select the Protection for Secondary Circuit of Electric Substation
变电站二次回路保护电器的选用 - Based on the analysis of short circuit process, the principle to select relevant parameters when applying short circuit shunting protection is introduced.
以短路过程分析为基础，阐述了应用短路分流法保护时电路有关参数的选择原则； - Firstly the paper draw comparisons between voltage type PWM rectifier and current rectifier and finally select voltage type PWM rectifier as the main circuit of the system.
文章首先对电压型PWM整流器和电流型PWM整流器进行了比较，根据系统的要求，最终选择了电压型PWM整流器为系统的主电路； - For narrow-band waveguide filter, it is very important to exactly analyze the major diameter inductive pin and select its relative circuit, which directly influence their key characteristics, such as relative bandwidth, insertion loss and out of band rejection of the filter.
对于窄带波导滤波器而言，大直径电感销钉的准确分析及其等效电路参数值的准确选择至关重要，直接影响滤波器的带宽、插损、带外抑制度等关键指标。 - Second, the detailed description of the buildings on-site controller works and how to select the MCU and other key components, circuit design and preparation of SCM procedures.
其次，详细说明了楼宇现场控制仪的工作原理以及如何选择单片机等关键元器件、设计电路和编写单片机程序。 - On the basis of this stable speed control proposal, make analysis and select key components, complete network circuit correction, phase-shift circuit and power amplifier circuit design.
以该稳速控制方案为基础，分析并选择了关键元部件，完成了校正网络电路、移项电路及功放电路的设计。 - Respectively, these three parts of the chip select hardware circuit design to provide a detailed program.
分别对这三部分的芯片选择、硬件电路设计等提供了详尽的方案。 - This paper build a simulation model by simulation software finally, and though the simulation, we verify the correctness of the design theory, and we select a reasonable circuit parameters by analyzing the simulation data.
论文最后利用仿真软件建立了仿真模型，并通过仿真，验证了设计理论的正确性，并通过分析仿真数据，选择了比较合理的电路参数。 - Divided the hardware system into several functional modules. Select the appropriate circuit components for the module.
将硬件系统按功能划分为几大模块，为各模块电路选择合适的元器件。